Geo TRACKER 1996 User Manual

Short TriplCity Maintenance Schedule
Inspect the locking front hubs (if equipped)
for correct operation (or every
3 months,
whichever occurs first). Repair or replace
as necessary.
0 Inspect propeller shafts and u-joints for
looseness and damage (or every
15 months,
whichever occurs first). Inspect more
frequently if used off-road or for pulling
a trailer. Tighten u-joint flange bolts
if necessary.
78,000 Miles (130 000 km)
0 Change engine oil and filter (or every
3 months, whichever occurs first).
0 Rotate tires. See “Tire Inspection and
An Emission Control Service.
Rotation’’ in the Index for proper rotation
pattern and additional information. During
tire rotation, check brake calipers
for
freedom of movement. Refer to the
appropriate
GM service manual for proper
caliper service procedures.
0 Inspect the locking front hubs (if equipped)
for correct operation (or
every 3 months,
whichever occurs first). Repair or replace
if necessary.
DATE ACTUAL MILEAGE
SERVICED
BY
7-25

Geo TRACKER 1996 Specifications

General

Brand	Geo
Model	TRACKER 1996
Category	Automobile
Language	English