Geo TRACKER 1996 User Manual

I Short Triplcity Maintenance Schedule I
!i3 Inspect the locking front hubs (if equipped)
for correct operation (or every
3 months,
whichever occurs first). Repair or replace
as necessary.
17 Inspect propeller shafts and u-joints for
looseness and damage (or every
15 months,
whichever occurs first). Inspect more
frequently
if used off-road or for pulling
a trailer. Tighten u-joint flange bolts
if necessary.
18,000 Miles (30 000 km)
0 Change engine oil and filter (or every
3 months, whichever occurs first).
An Emission Control Service.
0 Rotate tires. See “Tire Inspection and
Rotation” in the Index for proper rotation
pattern and additional information. During
tire rotation, check brake calipers for
freedom
of movement. Refer to the
appropriate GM service manual for proper
caliper service procedures.
0 Inspect the locking front hubs (if equipped)
for correct operation (or every
3 months,
whichever occurs first). Repair or replace
if necessary.
DATE
SERVICED
BY
ACTUAL MILEAGE
DATE
SERVICED BY
ACTUAL MILEAGE
7-11

Geo TRACKER 1996 Specifications

General

Brand	Geo
Model	TRACKER 1996
Category	Automobile
Language	English