Checking the Fluid Hot
or
Cold
0
Park your vehicle on a level place. Keep the
engine running.
0
With the parking brake applied, place the shift lever
in
PARK
(P).
With your foot on the brake pedal, move the shift
lever through each gear range, pausing for about
three seconds
in each range. Then, position the shift
lever
in
PARK
(P).
Let the engine
run
at idle for three minutes or more.
Then, without shutting
off
the engine, follow
these steps:
1.
2.
Pull
out
the dipstick
and wipe it with
a
clean
rag or paper towel.
Push it back
in all the
way, wait three seconds
and then pull it back
out again.
6-17
To Next Page
Loading...
Need help?
General
