Resuming
a
Set Speed
Suppose
you
set your cruise control at a desired speed
and
then you apply the brake.
This,
of
course, shuts
off
the cruise control. But you don’t need
to
reset
it.
Once you’re going about
you
can
turn
the lever to
RESUME/ACCEL
for
about one second.
25
mph
(40
km/h)
or more,
You’ll
go
right back
to
your chosen speed and stay there.
Increasing Speed While
Using
Cruise Control
There are two ways to
go
to a higher speed.
Here’s the first:
1.
Use
the accelerator pedal to get to the higher speed.
2.
Turn
the lever to
COAST/SET
and release.
Take
your foot
off
the accelerator pedal.
You’ll
now cruise
at the higher speed.
Here’s the second way to go
to
a
higher
speed:
1.
Turn
the lever to
RESUME/ACCEL.
2.
Hold the lever at
RESUME/ACCEL
until you get
up
to
the
speed you want, then release
the
lever.
Reducing Speed While Using Cruise Control
To
reduce your speed,
turn
and
hold the lever
in
the
COAST/SET
position until you reach the lower speed
you
want, then release the lever.
Passing Another Vehicle While
Using
Cruise Control
Use the accelerator pedal
to
increase your speed.
When
you take your
foot
off
the pedal, your vehicle will slow
down
to
the cruise control speed
you
set earlier.
To Next Page
Loading...
