Removing and Installing the Side Window
To
remove
the side window:
1.
Unfasten the Velcro@ on the top and rear quarter
of
the side window.
2.
Unzip the zipper almost all the way, leaving about
3
inches
(8
cm) of it still zipped and unfasten the
Velcro on the inside
of
the window.
3.
Release
the
plastic
strip sewn along the bottom edge
of
the window by gently pulling down and out then
release the plastic along the front edge
of
the
window
by
pulling it forward
and
out.
4.
Unzip the zipper the rest
of
the
way
and
remove
the
side window.
Reverse the steps to install the side window.
Please note that during installation:
You
may want to start by zipping the zipper about
3
inches
(8
cm), to hold the window in place. When
zipping, place the rear bottom corner
of
the window
inside the rear part
of
the vehicle
body
to
help
you
engage the zipper end.
To Next Page
Loading...
Need help?
General
