4.
5.
6.
7.
8.
9.
10,
11.
Press the
1
and
4
buttons together. Hold them down
until
---- shows on the display.
Press
the
left
or right
SEEK
arrow, or the left
or right
TUNE
arrow and
0000
will appear on
the display.
Press the
SEEK
left arrow and hold
it
until the first
digit
of
your code appears. Release the button.
Press the
SEEK
right arrow and hold it until
the second digit
of
your code appears. Release
the button.
Press
the
TUNE
left
arrow
and
hold
it
until
the
third
digit of your code appears. Release the button.
Press
TUNE
right arrow and hold it until the fourth
digit of your code appears. Release the button.
Press
AM-FM
after
you
have checked that the code
you entered is the one you wrote down. Then, REP
will appear on the display which means you need to
repeat Steps
5
through
9,
Press
AM-FM
again and the display will now
show
SEC.
Disabling
the Theft-Deterrent Feature
If
your
radio
is
secured (SEC shows on the display) and
you wish to disable it, enter
your
security code as follows,
Dausing no more
than
15
seconds between steps.
I
1.
2.
3.
4.
5.
6.
7.
Press the
1
and
4
buttons together.
Hold
them down
until SEC shows
on
the display.
You
are now ready
to enter your security code.
Press the
SEEK
left arrow and hold it until the first
digit
of
your code appears.
Press
the
SEEK
right
arrow and hold it until the
second
digit
of
your
code
appears.
Press the
TUNE
left arrow and hold
it
until the third
digit
of
your code appears.
Press the
TUNE
right arrow and hold it until the
fourth digit of your code appears.
Press
AM-FM
after you have checked that
the
code
you
entered matches the one you wrote
down
and
0000
should now appear on the display.
You
will
need to repeat the above procedure.
If
the code
is
correct, the radio will
now
operate.
If
the code
is
wrong,
ERR
will appear on the display.
3-16
To Next Page
Loading...
Need help?
General
