Horn
The
lever
on
the
left side of the steering column
includes
your:
Turn Signal and Lane Change Indicator
Headlamp High/Low
Beam
Changer
and
Passing Signal
Lighting Operation
Turn
Signal and Lane
Change
Indicator
The turn signal has two upward (for right)
and
two
downward
(for
left) positions. These positions allow
you to signal a turn
or
a lane change.
To
signal a
tum,
move
the lever
all
the way
up
or
down.
When the
turn
is finished, the lever will return automatically.
To sound the horn, press one
of
the horn
symbols
on
your
steering wheel.
?ttm
Signal/Multifunction
Lever
An
&ow on the instrument
panel will
flash
in
the direction
of
the
turn
or
lane
change.
To
signal
a
lane
change,
just
raise or lower the lever until
the
arrow
starts
to flash.
Hold
it
there until
you
complete your lane change.
The lever will return
by
itself when you release
it.
As
you
signal a turn
or
a
lane change, if the
mows
don’t
flash but just stay on, a signal bulb may be burned out
and other drivers won’t see your turn signal.
If
a bulb
is
burned out, replace
it
to
help avoid an
accident.
If
the
arrows don’t
go
on at all when
you
signal
a
turn,
check
the fuse (see “Fuses and Circuit
Breakers” in
the
Index) and
for
burned-out bulbs.
2-28
To Next Page
Loading...
Need help?
General
