NOTICE:
When using concentrated washer fluid,
follow the manufacturer’s instructions for
adding water.
Don’t mix water with ready-to-use washer
fluid. Water can cause the solution
to
freeze
and damage your washer fluid tank and
other parts of the washer system.
Also,
water doesn’t clean
as
well as washer fluid.
three-quarters full when it’s
very
cold. This
allows
for expansion, which could damage
the tank
if
it is completely full.
windshield washer.
It
can damage your
washer system and paint.
Fill your washer fluid tank only
0
Don’t use radiator antifreeze in your
Brakes
Brake
Fluid
Your brake master cylinder reservoir
is
here. It is filled
with
DOT-3
brake fluid.
There are only two reasons why the brake fluid level
in
the
reservoir might
go
down. The first
is
that the brake fluid
goes down to
an
acceptable level during normal brake
lining
wear. When new linings
are
put
in,
the fluid level
goes back up.
The
other reason
is
that fluid is leaking out
of the brake system.
If
it
is,
you
should have your brake
6-29
To Next Page
Loading...
Need help?
General
