Noise Reduction:
Press the button with the double-D
symbol to remove noise from tapes encoded with
Dolby
NR.
Dolby Noise Reduction is manufactured under a license
from
Dolby Laboratories Licensing Corporation. Dolby
and the double-D symbol are trademarks
of
Dolby
Laboratories Licensing Corporation.
EJECT
Press the button with this symbol to remove
the tape and switch to radio.
TAPE:
Press this button when the radio is playing to
switch to tape play.
To
switch from the tape to the radio
when the tape
is
playing, press the
AM-FM
button.
R-M:
Press this button to hear the radio when you are
fast forwarding or reversing
a
cassette tape. You can use
the TUNE,
SEEK
and PRESET
SCAN
buttons while
in
the radio monitor mode.
CLN:
This message may appear on the display.
If
it
does, your cassette tape player needs to be cleaned.
It
will still play tapes, but
you
should clean it as soon as
possible to prevent damage to your tapes and player.
See “Care
of
Your Cassette Tape Player” in the Index.
After
you
clean the p1ayer;press and hold
EJECT
for
five seconds to reset the
CLN
indicator. The radio will
display
---
to show the indicator was reset.
AM-FM
Stereo with Cassette Tape and
Compact Disc Player (Option)
To
Play
the
Radio
Turn the ON-VOL
knob
to turn the system on or off.
VOL:
Turn this
knob
to adjust the volume.
RCL:
Press this button to see the station being played
for
a
moment. Or, press it
if
you want to see the time
when
the
ignition
is
off.
3-11
To Next Page
Loading...
Need help?
General
