6.
Start the engine and
let
it
run until you can feel
the
upper radiator
hose
getting hot. Watch out
for
the
engine fan.
filler neck may be lower.
If
the level
is
lower, add
more
of
the proper mix through the filler neck until
the level reaches the base
of
the filler neck.
7.
By
this time the coolant level inside the radiator
8.
Then replace
the
pressure cap.
At
any
time
during
this
procedure
if
coolant
begins
to flow out
of
the
filler neck, reinstall the pressure cap. Be sure the
arrows on the pressure cap line up like this.
5-21
To Next Page
Loading...
Need help?
General
