A
CAUTIQN:
Rust or dirt on the wheel, or on
the
parts to
which
it
is
fastened,
can make the wheel nuts
become loose after
a
time. The wheel could come
off and cause an accident. When
you
change
a
wheel, remove any rust or
dirt
from the places
where the wheel attaches to the vehicle. In an
emergency,
you
can use
a
cloth or
a
paper towel
to do this; but be sure to use
a
scraper or wire
brush later, if
you
need to,
to
get all the rust or
dirt
off.
k!,
CAUTION:
Never use oil or grease on studs or nuts.
If
you
do,
the nuts might come loose. Your wheel could
fall
off,
causing
a
serious accident.
6.
Replace the wheel nuts with the rounded
end
of
the
nuts toward the wheel. Tighten each nut
by
hand
until the wheel
is
held against the
hub.
5-29
To Next Page
Loading...
