GeoMax Zenith10/20 SERIES User Manual

Zenith10/20 GNSS Series - 13 -
Installation Guide
© 2011 GeoMax AG, Widnau, Switzerland
With the handheld connected to your PC, run the installer file fieldgeniusxxx.exe
where xxx is the language. The PC will attempt to connect to the handheld and install
the FieldGenius software. Follow the Windows installation wizard. At the Device
Selection window, select the data collector as Windows Mobile 6.1 and higher.

GeoMax Zenith10/20 SERIES Specifications

General

Brand	GeoMax
Model	Zenith10/20 SERIES
Category	Receiver
Language	English