Configuration Bluetooth
DEFAULT To set all values to factory
default.
Field Description
Pin The Pin code needed to communicate to the instrument. The
default value is 0000. Before the new Pin will be active, a reboot
of the system would be required.
Configuration RS232
DEFAULT To set all values to factory
default.
Field Description
Baudrate Speed of data transfer from receiver to device in bits per second.
1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600,
115200
Parity Even Even parity.
Odd Odd parity.
None No parity.
Data bits Number of bits in a block of digital data.
7 Data transfer is realised with 7 databits.
8 Data transfer is realised with 8 databits.
Stop bits
1 Number of bits at the end of a block of digital data.
2
Flow control None
RTS/
CTS
Hardware flow control enabled.
42 Settings
To Next Page
Loading...
Need help?
General
