GeoVision GV-OPAL S1 User Manual

1.4 Inserting the SD card
A micro SD card is needed to save recording data from the GV-OPAL Camera in the cloud.
Insert the supplied micro SD card as shown.
Figure 1-7
IMPORTANT: Removing the battery from the camera when the power is on may
cause damage to the SD card. Make sure to press the Power button to turn off the
power.

Note: To prevent the micro SD card from any potential damage, put the protective cap
back on the camera if the bottom battery docking is not installed.
8

GeoVision GV-OPAL S1 Specifications

General

Brand	GeoVision
Model	GV-OPAL S1
Category	Security Camera
Language	English