Gesipa PH 2 - English

17
GB
Table of Contents
1. Use for intended purpose ...................................................................... 18
2. Safety information .................................................................................. 18
3. Technical data ......................................................................................... 19
4. Equipment/accessories .......................................................................... 20
5. Working capacity .................................................................................... 20
6. Nosepiece assignment ........................................................................... 21
7. Start-up .................................................................................................... 22
7.1 Selecting and changing the nosepiece ............................................... 22
7.2 To set a blind rivet ............................................................................... 22
8. Sucking in and holding a blind rivet ..................................................... 23
8.1 PH 2-VK .............................................................................................. 23
8.2 PH-Axial .............................................................................................. 23
8.3 PH 1 + VAS, PH + VAS ....................................................................... 23
9. Emptying the spent mandrels from the container ............................... 23
10. Maintenance and care ............................................................................ 24
10.1 To clean or change the jaws ............................................................. 24
10.1.1 PH 2-VK ............................................................................... 24
10.1.2 PH 1, PH 2, PH-Axial ........................................................... 24
10.2 Storage ............................................................................................. 24
11. Repairs ..................................................................................................... 25
12. Troubleshooting ...................................................................................... 25
12.1 Blind rivet is not set ........................................................................... 25
12.2 Spent mandrel is not conveyed automatically into the container ...... 25
13. Warranty ................................................................................................... 26
14. CE Declaration of conformity ................................................................ 26