Gesipa PH 2 - GESIPA Riveting Tool Equipment and Accessories; GESIPA Riveting Tool Working Capacity

20
GB
4. Equipment/accessories
5. Working capacity
Tool type PH 1 PH 2 PH 2-VK PH-Axial VAS (PH 1,
PH 2)*
Nosepiece in working position 16/24 16/32 10/24 16/24 -
Nosepiece, supplied
16/18
16/27
16/29
16/24
16/27
16/29
16/36
10/18
10/27
16/27
16/29
16/32
-
1 pair/set of jaws Item 4 Item 4 Item 13 Item 22 -
1 spent mandrel container Item 20 Item 20 Item 10 to order
Part No.
728 8913
1 wrench MSU
  
-

1 wrench MSZ
  
-
-
1 nosepiece wrench - -
-
- -
1 Allen key WAF 4 - -
-
- -
1 air deector (Item 896) - - - - -
1 jaw pusher with reducing tube
in working position (Item 125)
(for blind rivet up to Ø 4 Al, Cu)
- - -

-
Tool type PH 1 PH 2 PH 2-VK PH-Axial
Standard blind rivet Ø (mm) 2.4 - 4
4 - 5
2.4 - 3.2*
2.4 - 4 (PG-
Al, steel and
aluminium)
4 - 5 (alu-
minium and
steel)
2.4 - 3.2*
Material all all all all
* Only available as spare part