Getinge Maquet SERVO-i - Page 33

• Press the latches and insert the inspiratory
channel.
Important:
• There should always be clearance
between the connector muffs and gas
modules.
• Make sure the latches are locked in
position.
3.4.5 Insert the O
2
cell/O
2
sensor
Insertion of O
2
cell
• Connect the O
2
cell connector and put the
O
2
cell in position.
• Close the locking catch.
Insertion of O
2
sensor
• Put the O
2
sensor in position.
SERVO-i/s, User's Manual
33
| Maintenance |
3 |