Getinge Maquet SERVO-i - 3.4 Extended Cleaning of Inspiratory Channel

3.4 Extended cleaning of inspiratory
channel
3.4.1 Preparations and dismantling
Follow the instructions for preparation and
dismantling as given on page 28.
O
2
cell is installed
• Lower the locking catch.
• Disconnect the O
2
cell connector and lift
out the O
2
cell.
O
2
sensor is installed
• Disconnect the O
2
sensor and carefully
unlock the latches.
• Lift the O
2
sensor out of position.
SERVO-i/s, User's Manual
31
| Maintenance |
3 |