86
The parameters of WEP (Wire Equivalence Protection) are described as follows:
Field Description
WEP Key Length When selecting 64 bit (10 hex digits/5 ascii keys),
it allows you to set 10-hex-digit or
5-ASCII-character key.
When selecting 128 bit (26 hex digits/13 ascii
keys), it allows you to set 26-hex-digit or 13 -
ASCII-character key.
WEP Key Entry
Method
You may select Hexadecimal or ASCII text.
WEP Keys (WEP
key 1~4)
For setting WEP keys.
Default Key Set a default key.
- Security Policy (WPA-Personal or WPA2-Personal Mode)
When selecting the security mode to be WPA-Personal or WPA2-Personal, the
WPA table appears on the System Configuration page.