Getnet GR-534W User Manual

81
Step1 Click Wireless > Basic to display the Basic Wireless Settings page.
Step2 On this page, set the AP channel to accord with the peer AP (An AP that
wants to connect to the GR-534W by WDS).
Step3 On the Basic Wireless Settings page, set the WDS mode to be Repeater
Mode, set the physical mode and the encryption type of AP to accord with
that of peer AP, and then enter the MAC address of the peer AP. After
finishing the settings, click the Apply button to apply the settings. The
GR-534W will work in the Repeater Mode.

Getnet GR-534W Specifications

General

Brand	Getnet
Model	GR-534W
Category	Wireless Router
Language	English