belongs to Instrument Reverb exclusively. Factory presets provided for Instrument Reverb focus on
instrument specific effects but derive their characteristics from the same parameters and value
ranges.
10.6.1.1 REVERB TYPES AND PARAMETERS
The following reverb types and parameters are available:
Reverb Types (Instrument and Room)
Plates produce a mechanically generated reverb without early reflections.
This is a simulation of a smaller size plate with a certain characteristic.
Plates produce a mechanically generated reverb without early reflections.
This is a simulation of a medium size plate with a certain characteristic.
Plates produce a mechanically generated reverb without early reflections.
This is a simulation of a large plate with a certain characteristic.
Plates produce a mechanically generated reverb without early reflections.
This is a simulation of a smaller size plate with a different characteristic than
Plate 1 Small.
Plates produce a mechanically generated reverb without early reflections.
This is a simulation of a medium size plate with a different characteristic than
Plate 1 Med.
Plates produce a mechanically generated reverb without early reflections.
This is a simulation of a large plate with a different characteristic than Plate 1
Large.
This is an algorithm simulating a small room where early reflections are ac-
cepted.
This is an algorithm simulating a medium size room where early reflections are
accepted.
This is an algorithm simulating a large size room where early reflections are
accepted.
Algorithm simulating a smaller concert hall with early reflections and a longer
decay than room simulations
Algorithm simulating a medium size concert hall with early reflections and a
longer decay than room simulations
Algorithm simulating a large concert hall with early reflections and a longer
decay than room simulations
Each Reverb Type can be customized by the following parameters:
To Next Page
Loading...
