GF U1000 V2 - Calibration; Total

Password-protected menus Instruction manual
30
10.5.5 Calibration
Invalid
To Set
Valid
To clear
Done
Invalid
Valid
See Section 10.5.1 "Overview",
Page 25.
10.5.6 Total
& OFF
ON
See Section 10.5.1
"Overview", Page 25.
If the totalizer is activated, the display switches back and forth between the flow value and
the total.
 Press the button
Each screen is displayed for 30 s.
NOTICE
Damping Time [s]:
20
Zero Cut-off:
0.10 m/s
Zero Offset:
Averaging…9
Zero Offset
0.000 l/min
Range 0.00 – 0.50
0.10 m/s
Calibrat. Factor:
1,000
Range 0.500 – 1.500
1,000
Select Totals
ON | OFF
Reset Vol. Totals
NO | YES