GF U1000 V2 - 4 Transport and Storage; 5 Design and Function; Design; Principle of Operation

Instruction manual Transport and storage
5
 Regularly train personnel on all questions regarding the locally regulations applying to
occupational safety and environmental protection, especially for pressurised pipelines.
4 Transport and storage
 Protect the product against external forces during transport (impacts, knocks, vibrations
etc.).
 Transport and / or store the product unopened in its original packaging.
 Protect the product from dust, dirt, moisture as well as heat and ultraviolet radiation.
 Ensure that the product is not damaged either by mechanical or thermal influences.
 Before assembling, check the product for damage during transport.
5 Design and function
5.1 Design
1
Power supply (AC/DC)
4
Guide rail
2
Pipe clamp
5
User interface
3
Electronics module
6
Pipe
The U1000 V2 consists of an electronics module (3) and a guide rail (4), which together form a
single unit which is fixed to the pipe (6) by pipe clamps (2).
The U1000 V2 is supplied with power through an external 12 – 24 V power adapter (1).
5.2 Principle of operation
The U1000 V2 takes accurate flow measurements by determining the difference between the
transmission times of two ultrasound signals.