GGP WBE 0701 User Manual

Release 00 - 02/2008
Engine WBE 0701-WBE 0704
pag. 45
Service manual
14.3. Dismantling and checking the camshaft and
counterweight governor
1 - Remove the engine from the machine and open
the cover [ 14.2].
2 - Remove the camshaft (10).
3 - Measure seat (A) of the camshaft, checking for
wear and tear. The value must not be lower than
28,05 mm (IN) and 27,72 (EX).
4 - Check the regular movement of the pressure
reducer (11) and the efciency of the spring (12);
the whole group must always be replaced in the
case of breakage or irregular operation of the
pressure reducer.
5 - Check that the irregolar centrifugal (13) that are
not present ruptures of the lubrication pallets.
6 - Turn the governor’s gears quickly and check that
the counterweights (14) expand correctly, causing
the pin (15) to be moved axially.
14. ENGINE BLOCK - Overhauling internal parts
(IN)
(EX)
10
11
12
A
15
14
13
<< BACK >>
back to the index

GGP WBE 0701 Specifications

General

Brand	GGP
Model	WBE 0701
Category	Engine
Language	English