GGP WBE 0701 User Manual

Release 00 - 02/2008
Engine WBE 0701-WBE 0704
pag. 51
Service manual
14. ENGINE BLOCK - Overhauling internal parts
20 - Put the piston into the ring compression tool
(41).
21 - Oil the inside of the piston liberally and insert the
piston, with the marking facing the exhaust.
22 - Mount the engine shaft (35) and the connecting
rod cap (24) with the relative screws (26), taking
care with the position references (42) so as to avoid
inverting the mounting direction of the cap.
Closethescrews(26)totheindicatedcouple.
23 - After having xed the connecting rod cap, take
the greatest care to ensure that the two position
references (22) and (23) punched on the engine
shaft and camshaft gears, coincide, ensuring the
correct distribution phasing.
41
41
26
42
24
35
23
22
<< BACK >>
back to the index

GGP WBE 0701 Specifications

General

Brand	GGP
Model	WBE 0701
Category	Engine
Language	English