Giant D332SWT User Manual

29
4.Safety
however, because some areas cannot be guarded or shielded without preventing
or interfering with proper operation.
Different applications may require optional safety equipment. Be sure you know
the work site hazards and equip the machine and the operator as necessary. The
information in this manual does not replace any applicable safety rules and laws.
Before operating the machine, know the rules and laws for your area. Make sure
the machine is equipped as required according to these rules/laws.
Remember that some risks of injuries may not be immediately apparent.
Exhaust gases and noise pollution may not be visible, but these hazards can
cause permanent injuries.
Some photographs in this manual may show doors, guards and shields open or
removed for the purposes of illustration only. Be sure that all doors, guards and
shields are in the proper operating positions before starting the engine to operate
the machine.
ROPS/FOPS
The machine is for the safety of the operator always
equipped with a four-post ROPS/FOPS, which may
never be removed or modified. See chapter operation,
section ROPS + FOPS.
WARNING

Giant D332SWT Specifications

General

Brand	Giant
Model	D332SWT
Category	Compact Loader
Language	English