EasyManua.ls Logo

Giant D332SWT - Engine Temperature; Engine Temperature Warning Light; Engine Oil Pressure Warning Light; Combination Switch

Giant D332SWT
130 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
83
6.Commissioning
ENGINE TEMPERATURE
During normal operation the meter is pointing in the middle,
between 40 °C and 90 °C.
Stop the engine if the meter reaches the red zone. Check the
coolant level and the V-belt which powers the water pump.
Check cooling system for leaks.
ENGINE TEMPERATURE WARNING LIGHT
This warning light indicates that the engine is too hot. Stop the
engine, check the coolant level and fan belt. Check the
cooling system for leaks and/or refill with coolant. See section
“Maintenance”.
ENGINE OIL PRESSURE WARNING
LIGHT
This warning light indicates an insufficient oil pressure. Stop
the engine immediately. Check the oil level every day with the
dipstick and add oil if necessary. See section ‘Maintenance’.
COMBINATION SWITCH
(option, otherwise horn button)
1. Klaxon
2. Road lights off
3. Parking lights
4. Dipped-beam headlamps
5. Right turn signal
6. Left turn signal
7. Headlamp flasher
8. Main-beam headlamps
120
80
40
ºC
1
5
2
6
3
7
4
8

Table of Contents

Related product manuals