9
1.General information
Do not use the machine for any applications or purposes other than those
described in this manual or manuals supplied with attachments. Contact the
Tobroco Machinery LLC Service Department before using attachments or
equipment not approved by Tobroco Machinery LLC, or if there are any questions
about approved attachments. Use of non-approved attachments or unauthorized
modifications is prohibited.
SERVICE/DEALERSHIP NETWORK
Your dealership network stands ready to provide any assistance that may be
required, including providing genuine service parts. All service parts should be
obtained from your dealer. Provide complete information about the part and
include the machine model and serial numbers. Record these numbers in the
spaces provided in chapter "Serial Numbers".
Tobroco Machinery LLC strives to continuously improve its products and reserves
the right to make changes and improvements in the design and construction of any
part without incurring the obligation to install such changes on any previously
delivered machine.
VIBRATION INFORMATION
Compact construction equipment is generally used in harsh environments. This
type of usage can expose an operator to uncomfortable levels of vibration. It is
useful to understand exposure to vibration levels when operating compact
equipment and what can be done to reduce vibration exposure. As a result,
equipment operation can be more efficient, productive and safe.
An operator's exposure to vibration occurs in two ways:
• Whole-Body Vibration (WBV)
• Hand-Arm Vibration (HAV)
WBV issues are primarily addressed in this manual, because evaluations have
shown that operation of mobile compact construction equipment on work sites
typically results in HAV levels less than the allowed exposure limit of 2.5 m/s2.
To Next Page
Loading...
Need help?
General
