Giant D332SWT - Page 47

47
4.Safety
M2 WARNING: Avoid Overturn
Side stability is reduced when:
1) turning; 2) operating on rough terrain or
side slopes; and 3) carrying load raised.
• Carry load low.
• Do not exceed Rated Operating
Capacity.
• Avoid steep slopes and high speed
turns.
• Travel up and down slopes with heavy
end uphill.
N WARNING: Avoid Injury or Death
Located on the control column, facing the
operator.
Always follow “Mandatory Safety Shut down
Procedure.”
1) Lower equipment to ground.
2) Reduce throttle, apply parking brake.
3) Shift to neutral.
4) Stop engine, remove key.
ANSI-Style and Common Safety Decal Location
5103008-36-A
WARNING
AVOID OVERTURN
Side stability is reduced when: 1) turning;
2) operating on rough terrain or
side slopes; and 3) carrying load raised.
Carry load low.
Do not exceed Rated Operating
Capacity.
Avoid steep slopes and high speed
turns.
Travel up and down slopes with heavy
end uphill.
STOP
P
WARNING
AVOID INJURY OR DEATH
Always follow “Mandatory Safety Shutdown
Procedure.”
1) Lower equipment to ground.
2) Reduce throttle, apply parking brake.
3) Shift to neutral.
4) Stop engine, remove key.
5103008-07-A
1
2
3
4
N