Risk of injury by burning.
The hydraulic components, hoses, piping, engine and exhaust are
very hot at operating temperatures.
Risk of damage.
When hearing an unusual noise: Immediately shut down the engine and check the
Wheel Loader and the hydraulic system for leaks. Check the lift and tilt parts for
damage, cracks and bends. Lower lift arm before inspection!
Prevent damage.
Tighten nuts and bolts periodically. See section ‘Maintenance’.
Prevent damage.
Check daily:
• Fixings and hinges of the lift and tilt parts of the Wheel Loader
• The attachment bracket for damage and bends
• Lift and tilt cylinders
• The hydraulic system for any damage or leaks
Risk of injury.
Ensure the Wheel Loader and its parts are fully and
correctly supported when doing maintenance. Make sure
the handbrake is applied.
To Next Page
Loading...
