Danger of technical damage!
Welding activities should only be performed by qualified
personnel! Ensure supervision by qualified personnel
when welding on or nearby containers which contain
flammable materials! Contact your dealer if you have any
questions.
• Disconnect the positive terminal from the alternator
before starting any welding activities on the loader.
• Turn the main mass switch OFF.
• Attach the welding clamp as close as possible to the welding area.
• The welding current may not pass through any bolt, joint, gear or hydraulic cyl-
inder.
• After welding, reconnect all the electrical connections and check their function.
To Next Page
Loading...
