Operation
Manual 21568, Rev. F, March 2008
2.4.3 Reading Values
These commands read the current settings of delay or offset.
Examples:
OUTPUT 713;PEAK A? ! Query the current sensor A trigger setting
ENTER 713;TRIG$ ! Query the trigger mode setting of the sensor, and return:
CW
or
INT_TRIG
or
EXT_TRIG
OUTPUT 713;PEAK A DELAY? ! Query the current sensor A delay setting
ENTER 713;Delay
OUTPUT 713;PEAK B OFFSET? ! Query the current sensor B offset
ENTER 713;Offset
To Next Page
Loading...