Gigabyte MD80-TM0 - PCI;PCI Error Enabling

- 101 - BIOS Setup
2-3-10-3 PCI/PCI Error Enabling
PCI-Ex Error Enable
Options available: Yes/No. Default setting is No.
Corrected Error Enable
Options available: Enabled/Disabled. Default setting is Disabled.
Uncorrected Error Enable
Options available: Enabled/Disabled. Default setting is Enabled.
Fatal Error Enable
Options available: Enabled/Disabled. Default setting is Enabled.
Enable SERR propagation
When this item is set to enabled, PCI bus system error (SERR) is generated and is routed to NMI.
Options available: Yes/No. Default setting is Yes.
Enable PERR propagation
When this item is set to Yes, PCI bus parity error (PERR) is generated and is routed to NMI.
Options available: Yes/No. Default setting is Yes.