Gigabyte MD80-TM0 - Bmc Network Configuration

BIOS Setup - 106 -
2-4-3 BMC network conguration
BMC network conguration
Select NCSI and Dedicated LAN
Switch NCSI and dedicated LAN and send KCS command.
Options available: Mode2(NSCI)/ Mode1 (Dedicated). Default setting is Mode1 (Dedicated).
Lan Channel 1
Conguration Address source
 SelecttocongureLANchannelparametersstaticallyordynamically(DHCP).Donothingoptionwillnot
modify any BMC network parameters during BIOS phase.
 Optionsavailable:Unspecied/Static/DynamicBmcDhcp.DefaultsettingisDynamicBmcDhcp.
Station IP Address
Display IP Address information.
Subnet mask
Display Subnet Mask information.
Please note that the IP address must be in three digitals, for example, 192.168.000.001.
Router IP address
Display the Router IP Address information.
Station MAC Address
Display the MAC Address information.
Real-time synchronize BMC network parameter values
Press [Enter] to synchronize BMC network parameter values.