Gigabyte MD80-TM0 - Network Stack

- 51 - BIOS Setup
2-2-3 Network Stack
Network stack
Enable/Disable UEFI network stack.
Options available: Enabled/DIsabled. Default setting is Disabled.
Ipv4 PXE Support
(Note)
Enable/Disable Ipv4 PXE feature.
Options available: Enabled/DIsabled. Default setting is Enabled.
Ipv6 PXE Support
(Note)
Enable/Disable Ipv6 PXE feature.
Options available: Enabled/DIsabled. Default setting is Enabled.
PXE boot wait time
(Note)
Press <+> / <-> keys to increase or decrease the desired values.
Media detect time
(Note)
Press <+> / <-> keys to increase or decrease the desired values.
(Note) This item appears when Network Stack is set to Enabled.