Gigaset C2 - Page 103

100
Date and Time
S1_SL1 / englisch / A31008-X150-B103-1-7619 / time_calendar.fm / 02.10.2003
Entering the start and end time for Night service
By factory default, the Start time is pre-set to 20:00 or 8:00 pm, and 08:00 or 8:00 am
for the
End time.
Activating/deactivating Saturday/Sunday all day Night service:
If Sat/Sun all day is set, then Night service is active between the indicated start and
end times from M-F, and all day on weekends. If Sat/Sun all day
is deactivated, then
calls are forwarded on the weekend between the set start and end time.
By factory default, Sat/Sun all day is activated.
v
Open the menu.
s Base Settings
Select the menu item and confirm.
s Night service
Select the menu item and confirm.
s
Select and confirm MSN, e.g. MSN1: Anna.
either ...
Enter the start time:
s Start time
Select the menu item and confirm.
~
Enter the start time (4-digit).
or ...
Enter the end time:
s End time
Select the menu item and confirm.
~
Enter the end time (4-digit).
... then
Í
Press the display key to open the submenu.
Save entry
Confirm.
a
Long press (back to idle status).
OK
OK
OK
OK
OK
OK
v
Open the menu.
s Base Settings
Select the menu item and confirm.
s Night service
Select the menu item and confirm.
s
Select and confirm MSN, e.g. MSN1: Anna.
s Sat/Sun all day
Select the menu item and confirm (‰ = On).
a
Long press (back to idle status).
OK
OK
OK
OK