Gigaset C2 - Configuring the Answering Machine in the Network for Fast Access

125
System settings
S1_SL1 / englisch / A31008-X150-B103-1-7619 / settings_bs.fm / 02.10.2003
Entering or changing the country code:
Phone numbers transferred from the GSM network always contain the international
country code, even when dialling within a country (e.g., +49 for Germany, +33 for
France, +39 for Italy, or +43 for Austria).
Therefore, a special setting for the country code is necessary if you have received a call
from the GSM network, this call was transferred into the directory or the calls list, and
you would like to call back from the directory or the calls list via the ISDN network.
Default settings: country code of each country (e.g., +49 in Germany).
Configuring the answering machine in the network for fast access
Precondition: You can only use the answering machine of your network provider in the
network if you have applied for it with your network provider.
As soon as the phone number of the answering machine has been entered in the net-
work, you can use fast access. You can dial the answering machine in the network
directly by holding down the key 1.
~ Í
Enter a new or changed long distance prefix and
open the menu.
s Save entry
Select the menu item and confirm.
OK
On the base:
SX303isdn SX353isdn
v
Open the menu.
s Base Settings
Select the menu item and confirm.
s Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 91).
s ISDN settings
Select the menu item and confirm.
s Lg.-dist. code
Select the menu item and confirm.
s Code :
Select.
v
Open the submenu.
s Change number
Select the menu item and confirm.
~ Í
Enter the country code and open the menu.
s Save entry
Select the menu item and confirm.
OK
OK
OK
OK
OK
OK
OK
On the base:
CX100isdn SX100isdn SX205isdn CX203isdn SX303isdn