Gigaset C2 - Setting the Alarm Clock

75
Date and Time
C1-C2 isdn / englisch / A31008-X150-B103-1-7619 / time_calendar.fm / 19.11.2003
Setting the alarm clock
You can use your handset as an alarm clock.
Precondition: You have set the date and time (page 74).
Activating/deactivating the alarm clock and setting the wake-up time
Cancelling a wake-up call
A wake-up call sounds on the handset with its selected ringer melody, and Alarm Clock
appears in the display. Press any key to cancel the wake-up call. The alarm clock is still
switched on.
on handset:
C2
Switching the alarm clock on:
¼
Press the display key.
Alarm Clock OK
Confirm (‰ = On).
Set the wake-up time:
~ OK
Enter hours/minutes and confirm. Example:
For 7.15, enter
QM15. The top line of the
screen displays the alarm clock icon
¼.
When the 12-hour display is selected:
s am OK
Select a.m. or p.m. and confirm (‰ = On), e.g. am.
or ...
Deactivate the alarm clock:
¼
Press the display key.
Alarm Clock OK
Confirm (‰ disappears).
a
Long press (back to idle status).
i
◆ A wake-up call only sounds when the handset is in the idle status and
the room monitor function is not activated.
◆ To find out how to set the wake-up volume and melody, turn to
(page 91).
◆ When you deactivate the alarm clock the ¼ icon will only go out if
there is no active appointment.