Gigaset N720 DECT IP User Manual

23
Operating information
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-2-7619 / using.fm / 06.02.2012
Version 2, 06.08.2010
LEDs on the base stations
The Gigaset N720 IP PRO base stations contain two DECT modules with separate status
displays.
Other displays:
u The second LED from the top (Power/LAN) flickers when you are restoring the factory
settings to indicate that the resetting process will begin as soon as you release the
reset button (
£ page 24).
From top to bottom
Status of DECT module 1
Power supply status If the power supply is OK, the LED
indicates the LAN connection status.
Status of DECT module 2
Reset button (
£ page 24)
Power/LAN 1/2 DECT 1/2 Description
Off Off No power supply / No supply voltage
Flashes (once a
second)
Off The base station is looking for the DECT
Manager
On Off Connection established to DECT Manager,
base station service not yet ready
Flashes (every two
seconds)
Off Firmware is being updated, base station
service not active
On On Base station DECT module ready, DECT
synchronised
On Flashes (every four
seconds)
Base station DECT module ready, DECT not
synchronised
Flashes (every four
seconds)
On Base station DECT module overloaded, DECT
synchronised
Flashes (every four
seconds)
Flashes (every four
seconds)
Base station DECT module overloaded, DECT
not synchronised
Please note
You can deactivate the base station LED displays using the Web configurator on the
DECT Manager (
£ page 93).
DECT 1
Power/LA
N
Power/LA
N
DECT 2
RESET

Gigaset N720 DECT IP Specifications

General

Brand	Gigaset
Model	N720 DECT IP
Category	Telephone Accessories
Language	English