GILBARCO VEEDER-ROOT Latitude LS-100 Installation Manual

Completing Field Wiring Wiring in Unit
MDE-5427E Latitude
™
Installation Manual · July 2022 Page 6-13
Completing Field Wiring
To complete the field wiring, proceed as follows:
1 Remove the cover of the J-box for models so equipped.
2 Make the connections as shown in Figure 6-3 on page 6-5 through Figure 6-5. Do not disturb
the factory wiring in the J-box and electronics cabinet.
3 For units with J-boxes, use pipe plugs to seal the unused openings in all J-boxes. Replace the
cover on the boxes.
4 Double-check all wiring connections for wire nuts, lugs, caps, and so on. Reinstall the J-box
cover. Ensure that you do not pinch the wires and use all J-box bolts.
5 Reassemble the lower doors and close the doors to the electronics cabinet.

GILBARCO VEEDER-ROOT Latitude LS-100 Specifications

General

Brand	GILBARCO VEEDER-ROOT
Model	Latitude LS-100
Category	Petrol Station Equipment
Language	English