GILBARCO VEEDER-ROOT Latitude LS-100 Installation Manual

Units Without Hose Retractors Installing Breakaways, Hoses, Swivels, and Nozzles
MDE-5427E Latitude
™
Installation Manual · July 2022 Page 7-3
Figure 7-1: Hanging Hardware
Breakaway
Nozzle
Swivel
Hose
4 Install the swivel (if used) to the hose. Follow the swivel manufacturer’s instructions.
5 Install the nozzle to the swivel or the hose. Follow the nozzle manufacturer’s instructions.
Note: Check for the correct nozzle cra
dle/hook type (vapor, non-vapor, and so on). It must not
be possible to activate the nozzle boot switch with the nozzle properly held in place in
the nozzle boot.
6 Use an ohm meter to check for continuity from the end of the nozzle to the conductive metal
surface in the unit (applies to both types of hose-retrievers or non-retrievers).

GILBARCO VEEDER-ROOT Latitude LS-100 Specifications

General

Brand	GILBARCO VEEDER-ROOT
Model	Latitude LS-100
Category	Petrol Station Equipment
Language	English