no effect on the monitor. The equipment uses the gray silicone airway, in case of the effect to the
equipment when defibrillation device was used on the patient.
General instruction:
The device is applied to Blood Pressure(BP) measure and monitor for adult(including pregnant
women), pediatric, and neonatal. It most stores 300 records of common user and 350 of ambulatory
Blood Pressure data. Every record includes the detailed measure time, systolic blood pressure,
diastolic blood pressure, mean blood pressure, pulse rate, error message and record number, etc.
This device has friendly operation interface, and adopts 2.4inch color LCD. It integrates data review
function and display function which includes BIG FONT single record data review, data list, BP data
trends chart, the current time,date,power and so on.
User can power on/off the monitor,start manual measure, set system parameters and so on with five
keys in the front panel. (Please refer to "Button Functions" part for detail)
The monitor does not have an alarm system, but it will prompt when the power is low, the measure
is wrong, or the measure data exceeds the set limits. When the power is low or the measure is wrong,
the prompt is audible and visual, the device will buzz intermittently and the red light will flash to
prompt the user to replace batteries or prompt the reason of the failed measurement; when the
measure data exceeds the set limits, the prompt is audible, the font color of measure results will
change to red. Users can open and close the prompt according to needs.
To Next Page
Loading...
Need help?
General
