6.5 Data Download
Before you download the measurement data from device, please make sure that:
1. The device is correctly connected to the computer properly.
2. The device is turned on.
3. Disconnect the device from patient before connecting it to the computer.
The downloaded patient data will be saved in case storage path set. If you want to change the
storage path, select "Set file path", the dialogue box (Figure 6.1.2) will appear, then you can change
the path.
Click the shortcut key
or "Download" from menu to select the data in which status is to be
obtained, then start to download the data.
To Next Page
Loading...