The cuff socket is located on the top of the device and the USB socket at the bottom of the device.
The stored data can be transferred to computer with the USB interface, and then various operations
can be performed by using the PC software. (Please refer to "Software Functions" part for detailed
contents)
Note
In the common user mode, the monitor will periodically turn off backlight if there is no
operation, and automatically shuts down if there is no operation for two minutes. When the
backlight turn off in the ambulatory blood pressure mode, the blue indicator intermittently
flashes to prompt the device in running state.
1.3 Button Functions
All the operations of the Blood Pressure Monitor could be completed with the buttons. The names of
button are on them. They are:
Press the button for a long time, then the system will start. When turning on and off the monitor, the
red light and the blue both flash once to prompt that the on or off operation is successful. Press it for
a short time to return the boot-strap interface.
To Next Page
Loading...
Need help?
General
