The room temperature rise or fall sharply, or the environment of measurement often changes;
Measuring in a moving vehicle;
The position of cuff applied (higher or lower than the heart level);
Continuous measurement for a long time;
4.4 NIBP Error Messages and Solutions
Low battery Device battery is low.
Replace the battery. If the problem
still exists, please contact us.
Loose cuff Cuff is not connected correctly.
Reconnect the cuff. If the problem
still exists, please contact us.
Atmospheric
Valve can not be open.
Restart the device. If the problem still
exists, please contact us.
Object measuring the pulse is too
weak or the cuff is loose.
Check the cuff connectio
n, tighten
the cuff if it is loose.
Object measuring blood pressure is
over the measurement range.
Take another measurement.
If the
problem still exists, please contact us.
Excessive
Movement may result in too much
interference in the signal during
Be sure to keep still during
measuring process.
To Next Page
Loading...
Need help?
General
