② Install "AA" batteries according to polarities.
③ Slide to close the battery cover.
Note
Icon“
”: the batteries power will exhaust, the device prompts “Low battery” at the same time.
Replace with two new batteries (the same sort) at this time. Test while low power may cause data
deviation and other problems.
Cautions
Turn the unit off before replacing the batteries.
Please use 2 "AA" size manganese or alkaline batteries, do not use batteries of other
types.Otherwise it may cause fire.
New and old batteries, different kinds batteries can not be put off.Otherwise it may cause
battery leakage, heat, rupture, and damage to the monitor.
"+" and "-" polarities of the batteries must match the polarities of the battery compartment as
indicated.When the batteries power exhausts, replace with 2 new batteries at the same time.
Please take out the batteries when you do not use the device for a long time(more than ten
days).Otherwise it may cause battery leakage, heat, rupture, and damage to the monitor.
If electrolyte of battery gets in your eyes, immediately rinse with plenty of clean
water.Contact a physician immediately.Otherwise it will cause blindness or other hazards.
To Next Page
Loading...
Need help?
General
