purport, ischemia and neuropathy in the limb wearing the cuff. When monitoring a patient,
examine the extremities of the limb frequently for normal color, warmth and sensitivity. If any
abnormality is observed, stop the blood pressure measurements.
2. To stop auto measuring:
During auto measuring, press
button at any time to stop auto measurement.
3. To start a manual measuring:
Press
button to start a manual measuring in the ordinary user working environment.
During the idle period of auto measuring process, press
button at any time to start a
manual measurement. Then press
button to stop manual measurement and the
system continues executing auto-measuring program.
Note
If you are in doubt about the accuracy of any reading(s), check the patient's vital signs by an
alternative method before checking the functioning of the monitor.
Warning
If liquid is inadvertently splashed on the equipment or its accessories, or may enter the conduit
To Next Page
Loading...