Rev.: 4, Print date: 2021-05-05
NL95
1. Overview
1.1 Description
1.2 Design
1.3 Package contents
1.4 Installation and configuration procedure
2. Safety instructions
3. Installation
3.1 Installation requirements
3.1.1 Arrangement
3.1.2 Connection
3.2 Preparation
3.3 Mounting
3.3.1 Main unit
3.3.2 Power Supply and Input modules
3.4 Connecting
3.4.1 Connecting protective earth
3.4.2 Interconnecting modules
3.4.3 Connecting lights circuits
3.4.4 Connecting power supply
3.4.5 Conecting input/output contacts and NMEAcommunication
3.4.6 NMEAcommunication protocol
3.4.7 Powering up
4. Configuration
4.1 Configuration
4.2 Enter / Exit configuration mode
4.3 Configuration screens
5. Operating instructions
5.1 Normal operation mode
5.2 Manual operation mode
6. Commissioning
6.1 Commisioning procedure
6.2 Configuration setup form
7. Technical characteristics
7.1 Outlines / codes
8. Troubleshooting
9.Appendix
9.1 Project information form
9.2 Configuration setup form
9.3 Remote control MODBUS RTU supported parameters
9.4 Remote control RS485 and RS232 connection
To Next Page
Loading...
