CONTENTS
65
INSTALLATION & COMMISSIONING MANUAL - REVISION 1.0 - 19.FEB.2007
CONTENTS
ADVANCED
FUNCTIONALITY
8-4-4 Set User Access Code
This function allows the installer to change the customer Access Code. Use pq to change code
sequence.
8-4-5 Set User Functions
Allows the user access level to be set for every programming function.
Settings are: NONE - READ ONLY - FULL ACCESS
Do not set 8-4-5 Set User Functions to FULL ACCESS or the user will be able to enable all the other
functions!
It is not appropriate to set some functions to READ ONLY - for example “8-3-4 Calculate Program Flash
Checksum“.
The default setting for all programming functions is NONE.
8-4-6 Select language
Allows the language setting to for the system to be set.
Do this carefully - you will need to navigate back to this function to change it back again.
All text in the system will be changed to use the selected language. The change will take effect when ENTER
is pressed.
Languages supported are:
BRAZILIAN - ENGLISH - HUNGARIAN - ICELANDIC - ITALIAN - PORTUGUESE - SPANISH
8-4-8 Set Installer Access Code
This function allows changing the Installer Code without requiring knowledge of the Factory Code.
Display will show:
ENTER PRESENT CODE
ENTER NEW CODE
CONFIRM NEW CODE
To Next Page
Loading...