68
INSTALLATION & COMMISSIONING MANUAL - REVISION 1.0 - 19.FEB.2007
WARNING
THIS PANEL CONTAINS (LIVE) VOLTAGE. ALWAYS DISCONNECT THE MAINS SUPPLY
FROM THE PANEL BEFORE REMOVING OR INSTALLING COMPONENTS.
It is assumed that the user of this manual is a suitably-trained operator/maintainer
ELECTRO-STATIC SENSITIVE DEVICES (ESD) TAKE SUITABLE ESD PRECAUTION WHEN
REMOVING OR INSTALLING PRINTED CIRCUIT BOARDS.
This panel is marked to show that it conforms to the requirements of the above European Community
Directives:
DECLARATION OF CE CONFORMITY
GFE Lda, manufacturer of addressable fire detection equipment, declares, that the JUNIOR fire control
panel and repeater panels conform to the following directives of the EEC commission:
Construction Products Directive 89/106/EEC amendment 93/68/EEC
73/23/EEC - Low Voltage directive and amendment 93/68/EEC
89/336/EEC - EMC Directive and amendments 92/31/EEC & 93/68/EEC
and comply with the following standards:
EN55022 class B, EN61000-4-22,3,4,5,6,8,11
EN61000-3-2,3 EN54 Pt 2 and Pt 4.
João Paulo Galvão
Managing director
M.A.R.F, Sítio do Guelhim, Armazens F3 e F4, 8009-021 FARO, PORTUGAL
TEL.: +351 289 896 560 FAX.: +351 289 865 587 e-mail: global@globalfire.pt website: www.globalfire.pt
G L O B A L
F I R E E Q U I P M E N T
We, Global Fire Equipment Lda. hereby declare, for the effects of the requirements laid down with EN-54 Pt4 paragraph 6.1,
that the power supply equipment included in our analogue addressable fire alarm panel named JUNIOR, has been designed
in accordance with a quality management system which incorporates a set of rules for the design of all elements of the p.s.e.,
and that its components have been selected for the intended purpose , and expected to operate within their specification when
the environmental conditions outside the cabinet comply with class 3k5 of IEC 721-3-3 : 1978
We, Global Fire Equipment Lda. hereby declare, for the effects of the requirements laid down with EN-54 Pt2 paragraph 12.1,
that the control and indicating equipment which is our analogue addressable fire alarm panel named JUNIOR, has been
designed in accordance with a quality management system which incorporates a set of rules for the design of all elements of the
c.i.e. and its components have been selected for the intended purpose , and are expected to operate within their specification
when the environmental conditions outside its cabinet comply with class 3k5 of IEC 721-3-3 : 1978
We, Global Fire Equipment Lda. hereby declare, for the effects of the requirements laid down with EN-54 Pt4 paragraph 6.3.2,
that the power supply equipment included in our analogue addressable fire alarm panel named JUNIOR, is in accordance with
IEC 950:1991 for protections against direct and indirect contact, for the separation of the extra low voltage DC circuits from the
low voltage AC circuits and for earthing of metal parts.
To Previous Page
Loading...